Illinois "PKSM" capacitor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Behemot
    Badcaps Legend
    • Dec 2009
    • 4845
    • CZ

    #1

    Illinois "PKSM" capacitor

    What is this shit I mean it's some kind of general purpose caps, I know that, but why is there NO datasheet or sometin' when it's manufactured 12. week of 2015? That some daaamn custom part again?
    Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

    Exclusive caps, meters and more!
    Hardware Insights - power supply reviews and more!
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20490
    • UK

    #2
    Re: Illinois "PKSM" capacitor

    Any pictures of the offending item
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • Behemot
      Badcaps Legend
      • Dec 2009
      • 4845
      • CZ

      #3
      Re: Illinois "PKSM" capacitor

      Too lazy right now, but these're small D5 mm (5 or 7 tall), 22 uF/50 V, all black, PKSM, 105 °C, 1512 manufacturing date, nothing else.

      It's a little update, they used to use some no-name crap in there (Jiang Hai, Jamicon etc.) 22/50 for 85 °C max, but still, replaced them all just to be sure with Chemi-Cons LEs and KMGs (there are two spots where it does not like LEs). One of them already had 3times the ESR of the rest…and I don't particularly trust IC, especially with this they're showing.

      Haven't them been like bought by CDE? It looks to me they changed almost ALL of their series since I've been going through them couple years back.
      Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

      Exclusive caps, meters and more!
      Hardware Insights - power supply reviews and more!

      Comment

      • PeteS in CA
        Badcaps Legend
        • Aug 2005
        • 3578
        • USA, Unsure of Planet

        #4
        Re: Illinois "PKSM" capacitor

        One oddity I noticed, looking through IC's products diagram, is that IC's series names are 3-character, not 4-character. So custom? Counterfeit? Quien sabe?
        PeteS in CA

        Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
        ****************************
        To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
        ****************************

        Comment

        • Behemot
          Badcaps Legend
          • Dec 2009
          • 4845
          • CZ

          #5
          Re: Illinois "PKSM" capacitor

          Must be custom than. I took another unit as this one likely has bad CPU or something around the way. This time the one in the usual spot was totally done and couple others were bad too so I'll be replacing them as usually with something I trust.
          Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

          Exclusive caps, meters and more!
          Hardware Insights - power supply reviews and more!

          Comment

          Related Topics

          Collapse

          • Prolog
            RTX 3080 FE Identifying capacitor
            by Prolog
            Hi people, I hope this is the correct spot to post this, I'm new to the forum.

            I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

            I hope these photos make it clear which component I am referring to:
            (yes, the soldering is a bit botched from removing the blown one, I know)

            I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
            12-01-2024, 08:27 PM
          • chth96
            If I replace with inferior capacitor, Is it No harm to other IC components at all?
            by chth96
            I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
            Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
            It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
            So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
            I know that these capacitor will not last as long as nichicon capacitor...
            12-22-2023, 04:34 AM
          • chth96
            How can I test non-polarized capacitor?
            by chth96
            I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
            I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

            And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
            I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
            06-02-2024, 07:31 PM
          • chth96
            Is it no harm to replace with capacitor without ripple current rating?
            by chth96
            When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


            Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
            But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
            Rubycon YK DataSheet (b...
            04-19-2024, 05:19 AM
          • chth96
            Should I replace polymer capacitor?
            by chth96
            a few days ago I finally purchased mser-100 v2 and I tested its abillity of measuring ESR value.
            I found that It shows pretty accurate ESR value for electrolytic capacitor,But When I measure polymer capacitor of dreamcast game console,I found that one third of polymer capacitor's ESR value is more than twice the value of ESR meter table.(for example, I measured one polymer capacitor of 6.3v 100uf, It showed ESR value of 7.68)
            Although my dreamcast now turns 20 years old but it still works. I occasionally have played game with it.
            Is this ESR value of polymer capacitor correct?...
            11-18-2022, 04:22 AM
          • Loading...
          • No more items.
          Working...