Announcement

Collapse
No announcement yet.

Cedar 13269-1 7 beep code

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cedar 13269-1 7 beep code

    good day all, i have a dell 3542 with 7 beep code. most of the common voltages are available, but am getting 7 beeps. Any ideas or solutions will be appreciated......

    #2
    Re: Cedar 13269-1 7 beep code

    Give voltage on all coils. What is the reading on dc supply(after turning on) in these 2 scenario's
    01.With Ram
    02.Without Ram

    Known good clean me bios flashed??

    Comment


      #3
      Re: Cedar 13269-1 7 beep code

      Originally posted by mcplslg123 View Post
      Give voltage on all coils. What is the reading on dc supply(after turning on) in these 2 scenario's
      01.With Ram
      02.Without Ram

      Known good clean me bios flashed??
      1. bios is ok, have cross checked it,
      2.ram voltages are stable with or without ram, 1.36v
      3.all ram voltages are ok( on the ram slots)
      4.pch voltage and cpu voltagees are ok , and the cpu is getting hot.

      Comment


        #4
        Re: Cedar 13269-1 7 beep code

        I asked for consumption on your dc-supply. Are you powering the mb from adapter??
        Check DRAMRST# on pin30 of ram slot.

        Comment

        Working...
        X