I have an Epson L1300 printing 1 blank page with each job. It always prints a blank page first then prints the print job normally. It is doing this everytime something is printed. It is shared over a small network (installed on 1 pc via usb cable). It is doing this on all the computers.
-
So I am trying to repair broken thunderbolt FW on X1 Yoga Gen 2. The EEPROM chip is WINBOND 25Q80DVNIG. I already do a back-up and erase. But when I try to wrote new FW, it was successfull, but when I tried to read it, it still blank. when I try to do a blank check, it gave me instant error in address 0. I already tried two CH341A, already did the 3.3v fix mod, using AsProgrammer, NeoProgrammer, Colibri, and CH341A 1.29. But the problem still occurred. What I did wrong here? Can anyone help me? Thanks in advance. Here is the log in Colibri :
...Code:Checking for blank... (Press
-
I've got a Hanns.G Hi221 Monitor that works for a moment and then the display goes off but the power LED indicator remains on. If you power it off and back on again it does the same thing, it comes on and then the display goes blank. From a cold start it takes 10 seconds or so before the display goes blank but if you turn it off and then back on again after it already being on it goes blank a lot quicker so I'm assuming something is getting hot which is causing the display to go off.
I've uploaded a video of it happening on YouTube:
I've taken the monitor... -
Hi all, I’ve got a problem I hope someone can help me fixi.
I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...01-11-2025, 03:18 PM -
Hello friends,
I have a problem with this printer Xerox Versalink C505 , printing perfectly in B&W but bad in color.
There is a little yellow ghost printing around color print.
So little text in color is unreadable.
I already change drum cyan & yellow with no success.
I try (i think) all avalable calibration in printer menu..
(black drum is dead but it's not the problem i think)
I'm not a printer specialist,if anyone has an idea?
Thanks !...12-01-2024, 09:08 AM -
I'm not a printer tech but was asked to lokk at an HP 2546 Deskjet which had been sitting around for 6 months or so.
When switched on, the machine goes through all the motions before deciding it is ready, only the 'Black-ink' warning light was blinking.
I managed to clear this, only for it to return, so went out and got the cartridge refilled at a market stall who do that kind of thing. The lady pointed out how dry the cartridge sponge had become and it took her almost 30 minutes to get the ink to flow, but she did.
This is where it starts to get interesting,...
Comment