Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 03-10-2021, 10:09 PM   #61
CapsDude
Member
 
Join Date: Jan 2021
City & State: West Coast
My Country: United States
I'm a: Knowledge Seeker
Posts: 50
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by R_J View Post
200ma 200v would be the minimum, that -30v supply is fairly low current, so any fast recovery diode greater than 200ma/200v would work.
Ok, I'll get some and try it out. I appreciate your help so far.
CapsDude is offline   Reply With Quote
Old 03-16-2021, 04:52 PM   #62
CapsDude
Member
 
Join Date: Jan 2021
City & State: West Coast
My Country: United States
I'm a: Knowledge Seeker
Posts: 50
Default Re: Panasonic SA-HT820V Home Theater System

Got the part and soldered it. Nothing shows up on the display. It powers up tho because the vhs side starts up. The connector tape is fine.
Attached Images
File Type: jpg 20210316_154207.jpg (528.4 KB, 6 views)
File Type: jpg 20210316_154929.jpg (419.0 KB, 3 views)
CapsDude is offline   Reply With Quote
Old 03-16-2021, 05:24 PM   #63
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 6,991
Default Re: Panasonic SA-HT820V Home Theater System

And the voltage is?
R_J is offline   Reply With Quote
Old 03-16-2021, 06:59 PM   #64
CapsDude
Member
 
Join Date: Jan 2021
City & State: West Coast
My Country: United States
I'm a: Knowledge Seeker
Posts: 50
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by R_J View Post
And the voltage is?
Pin number 6 is reading .6V. All other pins are good.

Last edited by CapsDude; 03-16-2021 at 07:12 PM..
CapsDude is offline   Reply With Quote
Old 03-16-2021, 07:32 PM   #65
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 6,991
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by CapsDude View Post
Pin number 6 is reading .6V. All other pins are good.
Without -30 volts you won't get a display. To make sure there are no shorts on that line, CARFULLY remove the flat cable from P1102 and check if the negative -30v is on TL1030, if not, Unplug the unit and check the resistance of TL1030 to ground, it should be very high. Then as a last check, measure the transformer winding resistance It can be checked between D1270 cathode and ground (W56)

Last edited by R_J; 03-16-2021 at 07:40 PM..
R_J is offline   Reply With Quote
Old 03-16-2021, 09:09 PM   #66
CapsDude
Member
 
Join Date: Jan 2021
City & State: West Coast
My Country: United States
I'm a: Knowledge Seeker
Posts: 50
Default Re: Panasonic SA-HT820V Home Theater System

Didn't get -30 on TL1030.

TL1030 read 7.8 M Ohms
D1270 read 4.6 M Ohms
CapsDude is offline   Reply With Quote
Old 03-17-2021, 10:24 AM   #67
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 6,991
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by CapsDude View Post
Didn't get -30 on TL1030.

TL1030 read 7.8 M Ohms
D1270 read 4.6 M Ohms
If D1270 cathode (white band) to ground measures 4.6M Ohms you either damaged a trace or the transformer winding is open.
Attached Images
File Type: jpg minus30volt-path.jpg (170.9 KB, 4 views)

Last edited by R_J; 03-17-2021 at 10:45 AM..
R_J is offline   Reply With Quote
Old 03-17-2021, 04:29 PM   #68
CapsDude
Member
 
Join Date: Jan 2021
City & State: West Coast
My Country: United States
I'm a: Knowledge Seeker
Posts: 50
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by R_J View Post
If D1270 cathode (white band) to ground measures 4.6M Ohms you either damaged a trace or the transformer winding is open.
Any way to find out if it's either one of those?
CapsDude is offline   Reply With Quote
Old 03-17-2021, 04:50 PM   #69
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 6,991
Default Re: Panasonic SA-HT820V Home Theater System

Quote:
Originally Posted by CapsDude View Post
Any way to find out if it's either one of those?
Nope, no way to tell
R_J is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2021
Powered by vBulletin ®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 02:45 AM.
Did you find this forum helpful?