Hi,
After some troubleshooting with a computer and some components replacements I ended up with the laptop turning on, but no screen response. I downloaded a dump files from internet and flashed it and now the screen turns on (backlight) but the image is black. Also if you plug a USB drive is will start blinking (that was not happening before).
I was hoping if someone could point me in the right direction here about how to get the right Dump files to flash. Here I am attaching the original files I had before flashing the roms, the files I flashed and the Bios file as downloaded from the ASUS website (the one installed before being in that state, the BIOS update was not the cause of the initial fault). Checking with the UEFI Tool I could see that the ME Region of the original file and the one I flashed are different, but I am not sure how important it is.
Thanks in advance if someone can help me keep learning about it.
After some troubleshooting with a computer and some components replacements I ended up with the laptop turning on, but no screen response. I downloaded a dump files from internet and flashed it and now the screen turns on (backlight) but the image is black. Also if you plug a USB drive is will start blinking (that was not happening before).
I was hoping if someone could point me in the right direction here about how to get the right Dump files to flash. Here I am attaching the original files I had before flashing the roms, the files I flashed and the Bios file as downloaded from the ASUS website (the one installed before being in that state, the BIOS update was not the cause of the initial fault). Checking with the UEFI Tool I could see that the ME Region of the original file and the one I flashed are different, but I am not sure how important it is.
Thanks in advance if someone can help me keep learning about it.
Comment