Ok, I have a laptop motherboard who does not want to turn on. So I isolated the problem to either a BIOS or KBC problem. So I'm trying to read the software from the BIOS chip, and I get a wierd file. (all F's) I'm going to attached the file to this post. I'm using CH341A miniprogrammer usb board. And for the software, I'm using AsProgrammer v1.4.1. So I'm worried that BIOS software might have come corrupted, or it also could be that it is not reading from BIOS properly due to driver issues.
Power led is on and when I press read on software, the communication led comes on. However, when I try to read, is telling me to unprotect the chip first. This is first time doing this.
Motherboard: DA0R53MB6E1 Rev E R53
board schematic: https://cdn.badcaps-static.com/pdfs/...3fee8687da.pdf
BIOS Chip: EN25Q32B
AsProgrammer https://github.com/nofeletru/UsbAsp-flash/releases
CH341A usb board: https://rb.gy/6hj9ey
Power led is on and when I press read on software, the communication led comes on. However, when I try to read, is telling me to unprotect the chip first. This is first time doing this.
Motherboard: DA0R53MB6E1 Rev E R53
board schematic: https://cdn.badcaps-static.com/pdfs/...3fee8687da.pdf
BIOS Chip: EN25Q32B
AsProgrammer https://github.com/nofeletru/UsbAsp-flash/releases
CH341A usb board: https://rb.gy/6hj9ey
Comment