![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Aug 2014
City & State: nottinghamshire
My Country: uk
I'm a: Knowledge Seeker
Posts: 30
|
![]() hi guys, im a engineer with over 30 years experiance i have the ability to dump nand and spi via removal . but i work for a company where we get all JVC sets and logik tvs from currys returns as faulty so i repair alot of the faulty tv's with firmware corrupted files. bad sectors and such,
as we deal with latest models from 19 - 65" models. i can share all firmware from latest sets as well. just need a little help on how to. such as how to download full nand and spi via telnet commands i get to putty and get into vestel via telenet easy enough, get to this stage, VENDOR# after loggin into telnet / vestel tv. its a MB110 AT MINUTE, but also do all the vestel range from 33 upto MB211 SMarts,! so question is how can i dump fully working firmware from the tv direclty inc panel.bin i can get in via ftp and dump panel bin via ftp to pc. but wanted to know how to dump MBOOT.BIN & FULL NAND VIA TELNET COMMANDS IF ANYONE KNOWS as when i use . the A1 text file. it wont work with latest models. im looking into this at the minute as like i say we do almost every model of vestel.. good for me, as i can get every single piece of firmware from all vestel sets. so anyone who helps me solve this im willing to share every piece of firmware / dumps with you.,, for all sets, cheers lee. |
![]() |
![]() |
![]() |
#2 |
EVs Rule
Join Date: Apr 2011
City & State: Leeds
My Country: UK
Line Voltage: 230Vac 50Hz
I'm a: Professional Tech
Posts: 32,373
|
![]() You can try to alter the boot config file. The boot config file can be saved to a USB stick. It uses standard UBoot commands, open source software. Easy enough to write a config file that dumps NAND if you want.
Good luck and let us know how it works.
__________________
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead! Free service manuals: http://www.toms-service-manuals.com/ -- 72 LED/LCD TVs, 5 monitors, 28 plasma TVs, and 2 AVR 6.1 amplifiers fixed! -- I repair Pioneer 9G Plasma Main Boards & KRP-M01 Media Receivers (PM me for info) 2 Pioneer KURO 9G, 12 Panasonic LCD/Plasma, 1 Sony LCD, 1 NEC Plasma, 2 Yamaha HTS, 5 Sharp LCDs, 5 Toshiba LCDs, 7 Philips Plasma/LCD, 1 Hitachi Plasma, 11 LG LCD/Plasma, 18 Samsung LED/LCD/Plasma, 1 Thomson Plasma, 1 Atec LCD, 1 Hanspree LCD, 1 Xerox LCD, 1 Harwa LCD, 2 Proview LCD, 2 Hyundai LCD, 1 "Onn" LCD, 1 Grundig LCD, 1 Dell LCD, 1 iiyama LCD, 1 Acer LED, 1 Logik LCD, 1 Baird (China) LCD, 6 Bush LCDs, 22 Vestel LCDs (Best->Worst) |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2014
City & State: nottinghamshire
My Country: uk
I'm a: Knowledge Seeker
Posts: 30
|
![]() so hows this done can u explain in more detail pal im not too bad at software / hardware. just need a few pointers on how to start
|
![]() |
![]() |
![]() |
#4 | |
New Member
Join Date: Dec 2020
City & State: Boston MA
My Country: USA
I'm a: Knowledge Seeker
Posts: 1
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|