Re: Recapping Antec SmartPower SP350 and SP400
Picture from this thread:
https://www.badcaps.net/forum/showthread.php?t=31149
Picture: https://www.badcaps.net/forum/attach...chmentid=69689
While it -has- the fan controller on it, it's not its' only function. It does the PS_ON line and voltage Supervisor too.
One of the 2 smaller chips (IIRC...?) do the PS_ON. WT7518D
notes, notes, notes... Ah-ha!
Desolder just pin 8 (Vcc) of the 8-pin vertical chip and see if it will switch on. Make sure it's not touching the pad.
In the picture it's the one adjacent to the yellow cap and pin 8 is the bottom left.
** No need to remove the board to do this.
T
Picture from this thread:
https://www.badcaps.net/forum/showthread.php?t=31149
Picture: https://www.badcaps.net/forum/attach...chmentid=69689
While it -has- the fan controller on it, it's not its' only function. It does the PS_ON line and voltage Supervisor too.
One of the 2 smaller chips (IIRC...?) do the PS_ON. WT7518D
notes, notes, notes... Ah-ha!
Desolder just pin 8 (Vcc) of the 8-pin vertical chip and see if it will switch on. Make sure it's not touching the pad.
In the picture it's the one adjacent to the yellow cap and pin 8 is the bottom left.
** No need to remove the board to do this.
T
Comment