Hi, I wanted to share a working bios for HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0 / CPU i3 8th gen. I Hope it helps someone.
Announcement
Collapse
No announcement yet.
HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Collapse
X
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by AHED View Postthank you .
but don't work in my g7 epk50 LA-G07EP i3 7th gen.
light blinking 5 long 3 short .
any help!!!Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Dear, I tried to program the bios, but after programming, if I read chip there are a some differences. I tried to turn on laptop but still in black screen. Also I bought two new chips. Still the same. What could be happening? Thanks a lot.
images:
https://ibb.co/LRG6nYp
https://ibb.co/BL17hNM
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by periquitodel View PostDear, I tried to program the bios, but after programming, if I read chip there are a some differences. I tried to turn on laptop but still in black screen. Also I bought two new chips. Still the same. What could be happening? Thanks a lot.
images:
https://ibb.co/LRG6nYp
https://ibb.co/BL17hNM
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by periquitodel View PostThanks for your answer.
I upload my backup, but I think it is also damaged...Attached FilesDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Thanks Sir. Dont know why, when I program chip, get gorrupted. Im using CH341A programmer with Colibri (also I tried with other sofware). I also tried with new replacement chips. What can I do?
Best regards
EDIT: I tried now with NeoProgrammer V2.2.0.8 and it was programmed well!! Now laptop is turning on, fan spins, but screen keep in black. If I use phone torch I can see screen in black for some seconds, and then laptop restarts over and over.Last edited by periquitodel; 08-24-2021, 03:49 AM.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by Atiq View PostHi,
i am posting my old bios which i am facing no display, can someone fix it.
Thanks in advanceAttached FilesDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by periquitodel View PostThanks Sir. Dont know why, when I program chip, get gorrupted. Im using CH341A programmer with Colibri (also I tried with other sofware). I also tried with new replacement chips. What can I do?
Best regards
EDIT: I tried now with NeoProgrammer V2.2.0.8 and it was programmed well!! Now laptop is turning on, fan spins, but screen keep in black. If I use phone torch I can see screen in black for some seconds, and then laptop restarts over and over.
I have same problem.. Did you fix it? Please share with me the solution.
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by sap334 View Post
I have same problem.. Did you fix it? Please share with me the solution.Originally Posted by periquitodel View Post
Thanks Sir. Dont know why, when I program chip, get gorrupted. Im using CH341A programmer with Colibri (also I tried with other sofware). I also tried with new replacement chips. What can I do?
Best regards
EDIT: I tried now with NeoProgrammer V2.2.0.8 and it was programmed well!! Now laptop is turning on, fan spins, but screen keep in black. If I use phone torch I can see screen in black for some seconds, and then laptop restarts over and over.
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by hoaca388 View PostBuy the CH341A programmer, download NeoProgrammer V2.2.0.8 and install it. Use CH341A read your bios chip, save it and post it here.Attached Files
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by abderrahimfouad View Postsame problemAttached Files
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Re: HP 250 G7 BoardID EPK50 LA-G07EP Rev 2.0
Originally posted by ARMENIKUS View Postthe same problem with the epk50 la-g07ep bio, wikladivaya dump, help you please
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
Comment