I have an LG 55UJ6200 that cycles between sickly green, full color and back again with some lines and random banding at the top of the screen. After watching https://www.youtube.com/watch?v=pfrRhw7-ZII I was motivated to attempt this right away and got some pretty good success. I am using a huge piece of tape blocking a whopping 20 pins on the second cable in the tv. Only problem is after about 40 minutes or so the set gives a little random flicker - enough to be distracting. I am making this post to see if anyone has had a similar failure with this model and what pins are the ideal ones to block and which to never block. Might be quicker than trial and error.
Now in the video he is able to cut down his tape and isolate the issue to just one pin. Now that's difficult in my opinion as you must slice the tape off the cable and risk cutting the traces so I am applying the tape a little bit at a time. Here are the before pics.
Now in the video he is able to cut down his tape and isolate the issue to just one pin. Now that's difficult in my opinion as you must slice the tape off the cable and risk cutting the traces so I am applying the tape a little bit at a time. Here are the before pics.
Comment