ghost image and distortion on LG 22EA53

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • andrestecno
    Member
    • Jul 2022
    • 24
    • Argentina
    #1

    ghost image and distortion on LG 22EA53

    the monitor is suddenly left with a slightly darker half and an image on hold that is seen in dark colors. after the monitor has been completely turned off and unplugged. When you turn it on it reappears.

    What could be the problem ?
    Attached Files
    Tags: None
    • Aliencomputres
      Senior Member
      • Aug 2019
      • 195
      • România
      #2
      Re: ghost image and distortion on LG 22EA53

      Open it and check cable between mainboard and display !

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 8090
          • Canada
          #3
          Re: ghost image and distortion on LG 22EA53

          Probably someone washed your monitor and the water ran down right into the tab bonds.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • momaka
              HannStar Hanns-G HC194d LCD monitor repair
              by momaka
              Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
              03-15-2023, 10:17 PM
            • 3D Modelka
              AOC 27 monitor Q27G2WG4 doesn't display logo or image on screen
              by 3D Modelka
              Hello. I have a problem with my AOC 27 monitor, specifically model Q27G2WG4, which I have been using for 3 years. The monitor stopped turning on: when I turn it on, the backlight turns on, the indicator starts glowing white, but the logo on the screen does not appear, and there is no image. However, if I check in the Windows system, the monitor is displayed as connected and working. I tried connecting it via HDMI and DP, but the result remains the same. If I turn the monitor on and off multiple times, it will eventually start and work. However, when the monitor is working, there are no issues....
              1 Photo
              02-09-2024, 02:42 AM
            • Coguar
              HP ProOne 23.8 inch G9 ALL-in-One Desktop PC - Working when plugged to an external monitor, no image otherwise
              by Coguar
              In the device manager there is no built-in display located. The Intel UHD Graphics are displayed and only the external display is visible. The AiO turns on and works but is only showing a black screen on the monitor.
              I checked the voltage on the backlight connector and it reads ~20V. I tried reseating the LVDS and Backlight connector, yet the image still does not show.

              Does anyone have ideas whether or not this is a BIOS related issue? The only visible log in the BIOS logs is that the firmware was updated around a month ago.
              We already tried to fix it by resetting the...
              06-23-2025, 07:14 AM
            • jvelez
              Fujitsu monitor: power is there, but no image from PC
              by jvelez
              Hi, seeking for guidance on the following:
              I have a Fujitsu Siemens monitor T19-1 (base model is C19-1) that stopped showing any picture, besides the FS logo when it boots.

              I'm attaching a picture of the system board with some additional info.
              - The monitor recognizes the presence of the VGA signal: the power button switches from amber to blue, and vice-versa when the computer goes sleeping.
              - The inverter + CCFL seems to be working fine: the Fujitsu-Siemens logo appears when the monitor is switched on.
              - I measured the values in the power regulators:...
              11-06-2023, 02:08 PM
            • DoorOfTime
              MSI Optix Monitor--Functional but no image
              by DoorOfTime
              I just picked up this MSI Optix MAG271C curved monitor. It powers on, backlight comes on and it's recognized by Windows--even as far as to be able to use the speaker port for music. It recognizes input changes, and goes into standby as intended when disconnected.

              But it has no image whatsoever. On power-up it goes through what should be an "MSI" splash screen, but no image, and when hooked up as a secondary monitor I can drag items across my extended display with no change as it reaches the blank monitor.


              Does this sound like behavior that can be...
              05-09-2022, 10:00 PM
            • Loading...
            • No more items.
            Working...