Hello all,i`v got dead monitor,board model 715G8068-M0F-000-005I.
There is 19V and 5V present on board where external power supply is connected,Enable and Dim signal is no present.
I measured voltages and resistance on coils present on the main board,pls. take a look.
Front LED just blinks for a split of the second when PS is connected.
There is 19V and 5V present on board where external power supply is connected,Enable and Dim signal is no present.
I measured voltages and resistance on coils present on the main board,pls. take a look.
Front LED just blinks for a split of the second when PS is connected.
Comment