Hello everyone,
after my TV didn't turn on anymore I decided to find the problem.
I took my DMM and checked the power board - ok.
Then I decided to swap the mainboard for a few bucks. (Vestel 17MB230)
After the replacement I stumbled upon a faulty looking display image.
The picture size an the picture itself is distorted. (shown in the pictures)
I did some research found out, that somehow you can change the
display settings but I only found instructions for Vestel MB1xx Mainboards, not for the MB230.
I checked the display type on the new board: 55_VESQNDS (shown in the pictures)
I need to change it to an 58'' type. (VES580QNDP, shown in the pictures)
Any help is highly appreciated.
after my TV didn't turn on anymore I decided to find the problem.
I took my DMM and checked the power board - ok.
Then I decided to swap the mainboard for a few bucks. (Vestel 17MB230)
After the replacement I stumbled upon a faulty looking display image.
The picture size an the picture itself is distorted. (shown in the pictures)
I did some research found out, that somehow you can change the
display settings but I only found instructions for Vestel MB1xx Mainboards, not for the MB230.
I checked the display type on the new board: 55_VESQNDS (shown in the pictures)
I need to change it to an 58'' type. (VES580QNDP, shown in the pictures)
Any help is highly appreciated.
Comment