Please help me identify SMD components on HP Omen 17

[petr.hlavacu]

Hi, I have a motherboard from HP Omen 17 (DAG3BEMBCD0 rev. D) with two SMD components burnt. They are labeled as "L2x" , the package is probably SOT-23-5.
The components are labeled in the picture.

Can someone please help me identify these components? I could not find the schematic for the motherboard. The closest in terms of SMD markings are APL3512 (marking: L2A1, L2A4, .. L2Ax).

Thank you for any help or advice.

[mon2]

Re: Please help me identify SMD components on HP Omen 17

Unable to find a schematic as well.

Appears to be SOT23-5 package.

Are the markings from the topside of the burnt components?

Measure the voltage to ground of each pin of these parts.

[SMDFlea]

Re: Please help me identify SMD components on HP Omen 17

Hi, I have a motherboard from HP Omen 17 (DAG3BEMBCD0 rev. D) with two SMD components burnt. They are labeled as "L2x" , the package is probably SOT-23-5.
The components are labeled in the picture.

Can someone please help me identify these components? I could not find the schematic for the motherboard. The closest in terms of SMD markings are APL3512 (marking: L2A1, L2A4, .. L2Ax).

Thank you for any help or advice.

Is there a dot directly under the 2A .Are there any other dots or slashes or just the letters and numbers

[Sephir0th]

Re: Please help me identify SMD components on HP Omen 17

My bet is on NL17SZ08, so an AND-Gate

[rediii]

Re: Please help me identify SMD components on HP Omen 17

Hi, I have a motherboard from HP Omen 17 (DAG3BEMBCD0 rev. D) with two SMD components burnt. They are labeled as "L2x" , the package is probably SOT-23-5.
The components are labeled in the picture.

Can someone please help me identify these components? I could not find the schematic for the motherboard. The closest in terms of SMD markings are APL3512 (marking: L2A1, L2A4, .. L2Ax).

Thank you for any help or advice.

logic gate NL17SZ08DFT2G

not the same schematic and brd, but very similar and good for the circuit interpretation

[rediii]

Re: Please help me identify SMD components on HP Omen 17

My bet is on NL17SZ08, so an AND-Gate

><

[petr.hlavacu]

Re: Please help me identify SMD components on HP Omen 17

to SMDFlea:

No there is only L2x (the "x" has different font).

[petr.hlavacu]

Re: Please help me identify SMD components on HP Omen 17

logic gate NL17SZ08DFT2G

not the same schematic and brd, but very similar and good for the circuit interpretation

Thanks. I'll check it out.

[SMDFlea]

Re: Please help me identify SMD components on HP Omen 17

My bet is on NL17SZ08, so an AND-Gate

AND

logic gate NL17SZ08DFT2G

Truth table

Sephir0th F

rediii F

[SMDFlea]

Re: Please help me identify SMD components on HP Omen 17

As it doesn`t have a dot anywhere i don`t think its an ON semi part. The x could be a vertical date code, or lower case x L2x
.

[rediii]

Re: Please help me identify SMD components on HP Omen 17

AND


Truth table

Sephir0th F

rediii F

xD <3

[petr.hlavacu]

Re: Please help me identify SMD components on HP Omen 17

Hello again, I've been busier so I'll comment later.

I think I identified the wrong package and it could be a UML2N in a SOT-353 case.

https://cdn.badcaps-static.com/pdfs/...975aa47294.pdf
Do you think that's possible?