Hello everyone, i have an evga gtx 1650 super that i noticed is having a problem on pex voltage.
It happens that it will only work and give me 1v if i put some hot air above the Pex IC, i already replaced the IC as long as almost every resistors and capacitors around it, but it keeps like that.
do you guys think this could be a problem on the gpu core?
I put a picture of the part. The ic always has enable (1.2v) and vcc (5V) but the 1v will only appear if the area is a bit hot...
It happens that it will only work and give me 1v if i put some hot air above the Pex IC, i already replaced the IC as long as almost every resistors and capacitors around it, but it keeps like that.
do you guys think this could be a problem on the gpu core?
I put a picture of the part. The ic always has enable (1.2v) and vcc (5V) but the 1v will only appear if the area is a bit hot...
Comment