Hello,
I have 8 populated slots of ram for a total of 32GB but I have a problem on the amount seen from the system.
I found this issue time ago when I seen that the boot sequence told me the amount of ram was changed and maybe in the next boot all was ok.
Now the problem is always present and looking closer the mainboard I have seen 3 swollen 2200uF 6.3V capacitor around ram slots.
It s possible that the bad capacitors dont give the correct voltage to the ram slots and I see this problem?
Which capacitors are good for this application? (usually I use cheap ones but for this mainboard I would like to put good ones)
This are good enough?
Nichicon UHN1A222MHD6TO 10v 2200uf Radial Electrolytic Capacitor OLB024
bye
I have 8 populated slots of ram for a total of 32GB but I have a problem on the amount seen from the system.
I found this issue time ago when I seen that the boot sequence told me the amount of ram was changed and maybe in the next boot all was ok.
Now the problem is always present and looking closer the mainboard I have seen 3 swollen 2200uF 6.3V capacitor around ram slots.
It s possible that the bad capacitors dont give the correct voltage to the ram slots and I see this problem?
Which capacitors are good for this application? (usually I use cheap ones but for this mainboard I would like to put good ones)
This are good enough?
Nichicon UHN1A222MHD6TO 10v 2200uf Radial Electrolytic Capacitor OLB024
bye
Comment