Hi,
I've a DELL P2210 LCD that doesn't power on. Power led is off too. It seems completely dead.
I replaced all the capacitors but no change. Original capacitors however seemed OK.
Fuse is OK and the bridge rectifier seems OK too. When the power cord is plugged I read ~+3,5V instead of +5V on the connector towards the logic board. I'm stuck! Any suggestions?
I've a DMM and a digital scope. What else may I check?
Thanks!
PS: Service manual is in attachment.
I've a DELL P2210 LCD that doesn't power on. Power led is off too. It seems completely dead.
I replaced all the capacitors but no change. Original capacitors however seemed OK.
Fuse is OK and the bridge rectifier seems OK too. When the power cord is plugged I read ~+3,5V instead of +5V on the connector towards the logic board. I'm stuck! Any suggestions?
I've a DMM and a digital scope. What else may I check?
Thanks!
PS: Service manual is in attachment.
Comment