I'm replacing the caps in a ECU for an 88 Ford Ranger.
There are only 2 electrolytics and they are Nichicon, 1 is a 47uf 10v the other is a 3.3uf 63v. Both 8X12mm in size. Bungs on both protruding. No vent relief on top.
There are no series letters on these though just a date code of H8744 and a (M) they have a blue sleeve. Don't know how to figure specs for these, ESR and ripple.
Can anyone recommend a series to use?
Most others on the Ranger forums have been using Radio Crap caps to replace theirs, but I want to use good ones. Thanks.
There are only 2 electrolytics and they are Nichicon, 1 is a 47uf 10v the other is a 3.3uf 63v. Both 8X12mm in size. Bungs on both protruding. No vent relief on top.
There are no series letters on these though just a date code of H8744 and a (M) they have a blue sleeve. Don't know how to figure specs for these, ESR and ripple.
Can anyone recommend a series to use?
Most others on the Ranger forums have been using Radio Crap caps to replace theirs, but I want to use good ones. Thanks.
Comment