Hello everyone,
For this card received by my brother, there is a black screen detection in hdmi nor Display port when we connect by my screen.
After checking if short circuit on the main voltage lines I have indeed all my voltages present until the GPU and of course it heats up.
Only small thing I noticed for the GPU I have a voltage at all coils of 0.80 V stable usually on other card I find 0.90V approximately
For the VMEM I also have 1.38 V stable which should be 1.50 V I think.
What I did:
Flash the BIOS with a 2016 and 2018 version still the same and a different bios.
Check Bios powered in 1.8V ok
Check if short circuit on PCI-Express Reset signal pin 11 no short circuit
Check on pci express SMBus clock and SMBus data no short circuit
No missing component after 2 checks
Verification of pci 16x in diode mode all in good continuity at 0.450 mv and no deviation.
Not having an oscilloscope I cannot check the Quarter 27 Mhz
What can you advise me to check? I block ^^
I have the same problem on a GTX 1060 GIGABYTE 3GB and I changed the quartz oscillator still the same.
Thank you very much
For this card received by my brother, there is a black screen detection in hdmi nor Display port when we connect by my screen.
After checking if short circuit on the main voltage lines I have indeed all my voltages present until the GPU and of course it heats up.
Only small thing I noticed for the GPU I have a voltage at all coils of 0.80 V stable usually on other card I find 0.90V approximately
For the VMEM I also have 1.38 V stable which should be 1.50 V I think.
What I did:
Flash the BIOS with a 2016 and 2018 version still the same and a different bios.
Check Bios powered in 1.8V ok
Check if short circuit on PCI-Express Reset signal pin 11 no short circuit
Check on pci express SMBus clock and SMBus data no short circuit
No missing component after 2 checks
Verification of pci 16x in diode mode all in good continuity at 0.450 mv and no deviation.
Not having an oscilloscope I cannot check the Quarter 27 Mhz
What can you advise me to check? I block ^^
I have the same problem on a GTX 1060 GIGABYTE 3GB and I changed the quartz oscillator still the same.
Thank you very much
Comment