Announcement

Collapse
No announcement yet.

Help me solve this little mystery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help me solve this little mystery

    Hi all this is a circuit from a cheap "SilverCrets" meat grinder soldering contact has dragged and is there anyone who can suggest where or how to attach the negative in this position
    Attached Files
    Last edited by bohaboha; 12-17-2021, 10:58 AM.

    #2
    Re: Help me solve this little mystery

    just connect to same track ..scrape mask off and solder to it

    Comment


      #3
      Re: Help me solve this little mystery

      as you can see there is nothing left to scrape and right next to it there is a resistor pin can i connect it to the resistor?

      Comment


        #4
        Re: Help me solve this little mystery

        scrape anywhere here ....
        Attached Files

        Comment


          #5
          Re: Help me solve this little mystery

          Strip the wire back enough, run the wire through the hole and solder it to a couple of the other solder connections.
          Attached Files

          Comment


            #6
            Re: Help me solve this little mystery

            ok thank you petehall347 and R_J

            Comment

            Working...
            X