Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > General Electronics Technical Discussion
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 07-22-2020, 09:33 PM   #1
merkin
Member
 
Join Date: May 2010
Posts: 50
Default Help with cross reference FET

Hi,
I have a FET that is shorted and I need help finding a replacement preferably from Digikey.

The marking on the FET is AP30P10GH.

Thanks in advance.
merkin is offline   Reply With Quote
Old 07-22-2020, 11:56 PM   #2
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 38,931
Default Re: Help with cross reference FET

See spec sheet attached. You can contact Digikey and ask for sub suggestion, make sure the case style matches what you have.
AP30P10GH-HF
Attached Files
File Type: pdf AP30P10GH-HF (20120305).PDF (96.1 KB, 10 views)
__________________
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956

Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999

Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl

Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/

TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809

Last edited by budm; 07-22-2020 at 11:58 PM..
budm is offline   Reply With Quote
Old 07-23-2020, 11:38 AM   #3
merkin
Member
 
Join Date: May 2010
Posts: 50
Default Re: Help with cross reference FET

Thanks bud..

Digikey does not have a replacement unfortunately (at least that is what the live chat rep said)

So I found this cross reference site:
https://alltransistors.com/mosfet/cr....08&caps=TO252

I just am not sure about compatibility. This is not my design, its for a hoverboard, but I am sure the issue is this MOSFET since its shorted out.

Any way can anyone help me find a substitute?
merkin is offline   Reply With Quote
Old 09-20-2020, 09:09 PM   #4
tester272001
Member
 
tester272001's Avatar
 
Join Date: Apr 2011
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Hardcore Geek
Posts: 62
Default Re: Help with cross reference FET

Depending on your circuit this might work:
http://www.farnell.com/datasheets/2118299.pdf
Its a P-Channel with 28A and -100 V RDS on = 58MOhm. so that might be to o low. Power dissipation is 70W ! and its the right package. If your circut can deal with the 58MOhm instead of 80MOhm you might be set. Good luck!
tester272001 is offline   Reply With Quote
Old 09-30-2020, 01:26 PM   #5
tester272001
Member
 
tester272001's Avatar
 
Join Date: Apr 2011
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Hardcore Geek
Posts: 62
Default Re: Help with cross reference FET

if you want from Digikey and the substitute is OK then:
https://www.digikey.com/products/en?keywords=atp301
they carry the one I posted too.
tester272001 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2020
Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 01:14 AM.
Did you find this forum helpful?