Foot pedal re-stringing diagram / advice please

[zen]

Any help much appreciated

[skynet85]

Re: Foot pedal re-stringing diagram / advice please

This is a soviet guitar prefix, the arrow indicates the resistor that you need to check on your 10 kOhm board and check VT4

[redwire]

Re: Foot pedal re-stringing diagram / advice please

I would get the model number in Cyrillic and search yandex for it. Or even similar models use the same string/pulley system. Maybe post here:
http://sovietguitars.com/e107_plugin...ewforum.php?48
The hard part is getting 270° rotation between full up and down of the pedal and I can't see the pedal pulley.

Your R16 looks burnt- but it's more like glue is on it. 10k needs a lot of voltage to cook. A Q-tip and IPA can clean things up on the board.

[zen]

Re: Foot pedal re-stringing diagram / advice please

Thanks very much for your advice .

[skynet85]

Re: Foot pedal re-stringing diagram / advice please

Thanks very much for your advice .

From which country if not a secret ? how did this soviet thing get

[zen]

Re: Foot pedal re-stringing diagram / advice please

Just a customer , who has owned it for a long time .

[R_J]

Re: Foot pedal re-stringing diagram / advice please

This is what I found: This is the site: http://www.potroshiteli.ru/Reviews/Other/Fuzz.html

[zen]

Re: Foot pedal re-stringing diagram / advice please

Great RJ thanks

Looks like string loops round once over the pot wheel .

Should be able to sort it now .

[zen]

Re: Foot pedal re-stringing diagram / advice please

Have managed to string it .

Don't seem to have the full range of movement from the pot , but i doubt that was ever the case .

Will test & report back .

Here's some pictures for now .

[zen]

Re: Foot pedal re-stringing diagram / advice please

10K resistor mentioned by Skynet85 measuring good .