Hi,
I am from Australia, and thank the mods for allowing me access to your forum...thanks.
I have a 2018 Sony TV, and am in trouble trying to remove the back panel to replace a broken power supply board, that I have already purchased.
I have removed all 18 screws from the rear, as well as another 4 that are used to secure the legs.
I had the panel face down on a soft surface, ready to change things over, but cannot seem to work out how to get the back off, and I see nothing else to undo, to do so.
I believe that in the US and elsewhere, my model is probably just known as the KD 65x750.
It is this one, from the sony australia link
https://www.sony.com.au/electronics/...specifications
Here is a photo of the rear of mine.
https://imgur.com/a/yHlRpVW
If anyone may be of assistance to me, I would be most grateful for their help.
Thank you...
I am from Australia, and thank the mods for allowing me access to your forum...thanks.
I have a 2018 Sony TV, and am in trouble trying to remove the back panel to replace a broken power supply board, that I have already purchased.
I have removed all 18 screws from the rear, as well as another 4 that are used to secure the legs.
I had the panel face down on a soft surface, ready to change things over, but cannot seem to work out how to get the back off, and I see nothing else to undo, to do so.
I believe that in the US and elsewhere, my model is probably just known as the KD 65x750.
It is this one, from the sony australia link
https://www.sony.com.au/electronics/...specifications
Here is a photo of the rear of mine.
https://imgur.com/a/yHlRpVW
If anyone may be of assistance to me, I would be most grateful for their help.
Thank you...
Comment