Hi everyone, i have short on my graphic card on 3.3v line, so i desoldered the crystal and short still exist. I try find it with my power supply but, rails inside pcb is hot, but not any elements, i cant find what is broken. I dont have thermal camera. Have you any advice for me?
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Asus strix 980ti short on 3.3v without crystal on pcb
Collapse
X
-
Re: Asus strix 980ti short on 3.3v without crystal on pcb
I would advise you not to inject 3.3V into the graphics card unless you are trying to kill it.
You need to inject a safe voltage into 3.3V (such as 0.7V) and see if that voltage appears on any of the other voltage rails first (1.8V, PEX etc)Follow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
-
Re: Asus strix 980ti short on 3.3v without crystal on pcb
The crystal or lack of one should not affect the voltage railsFollow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
Comment
Comment