Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Eeprom dump thread!

    25Q40, 25Q80 and 24C512 - they are all on the motherboard, 25Q32 on the panel does not need to be touched.

    25Q40, 25Q80 is spi flash, 24C512 is eeprom.
    Last edited by lotas; 09-29-2022, 01:30 PM.

    Comment


      Re: Eeprom dump thread!

      Originally posted by lotas View Post
      25Q40, 25Q80 and 24C512 - they are all on the motherboard, 25Q32 on the panel does not need to be touched.

      25Q40, 25Q80 is spi flash, 24C512 is eeprom.
      Exactly, I hadn't found the 24C512 but with a magnifying glass it was better.
      On the other hand, I reflashed the 3 components and unfortunately it didn't change anything, the result is the same.

      Comment


        Re: Eeprom dump thread!

        You also asked for 24С512, maybe eMMC is covered with you (they have a certain service life).

        Comment


          Re: Eeprom dump thread!

          Originally posted by lotas View Post
          You also asked for 24С512, maybe eMMC is covered with you (they have a certain service life).
          If eMMC problem in this case I must translate that it is not repairable ?

          Comment


            Re: Eeprom dump thread!

            If you have never encountered eMMC, then it is better to replace the motherboard.

            You can find any BN41-02528A motherboard (they only have different firmware for different panels), you just need to rewrite or replace the 25Q80 (where the panel settings, T-con are located).
            Last edited by lotas; 09-30-2022, 03:04 PM.

            Comment


              Re: Eeprom dump thread!

              Originally posted by lotas View Post
              If you have never encountered eMMC, then it is better to replace the motherboard.

              You can find any BN41-02528A motherboard (they only have different firmware for different panels), you just need to rewrite or replace the 25Q80 (where the panel settings, T-con are located).
              I found a motherboard of the same reference extracted from a UE55KU6400 TV whose panel was broken but simply by programming the 25Q80 flash with the contents of that of my TV then the TV enters a looping start cycle

              I can try to change the eMMC but the problem will be to find the program. Is the program easy to find and what hardware is needed to program it ? Is it possible to change it and then reprogram it directly on the motherboard ?

              Comment


                Re: Eeprom dump thread!

                Originally posted by tehmatix View Post
                Blaupunkt 32-147I-GB-5B-HBKUP-UK , tv bootloop, led red > blue > red >blue
                Desolder UF11 and use CH341 for reprogram. After , go to menu and Factory reset
                Firmware below
                What's the screen model number for this dump and the main board number?

                Comment


                  Re: Eeprom dump thread!

                  Originally posted by totof View Post
                  I found a motherboard of the same reference extracted from a UE55KU6400 TV whose panel was broken but simply by programming the 25Q80 flash with the contents of that of my TV then the TV enters a looping start cycle

                  I can try to change the eMMC but the problem will be to find the program. Is the program easy to find and what hardware is needed to program it ? Is it possible to change it and then reprogram it directly on the motherboard ?
                  I finally changed the motherboard and my TV is working again.
                  Attached are the dumps of the new motherboard
                  Attached Files

                  Comment


                    Re: Eeprom dump thread!

                    Good Day All,
                    Looking for dump for Samsung UN49M5300AFXZA Ver.FA01. Board number BN94-12049D.
                    Assistance in getting this as I believe the original is somehow corrupted.
                    Original dump attached incase it can be fixed.
                    Thanks...
                    Attached Files
                    Last edited by shawnpsx323; 10-12-2022, 03:51 PM. Reason: forget file

                    Comment


                      Re: Eeprom dump thread!

                      Originally posted by shawnpsx323 View Post
                      Good Day All,
                      Looking for dump for Samsung UN49M5300AFXZA Ver.FA01. Board number BN94-12049D.
                      Assistance in getting this as I believe the original is somehow corrupted.
                      Original dump attached incase it can be fixed.
                      Thanks...
                      Anything guys?
                      Issue is that standby LED will flash 5 times. Power supply is good. I've tried another bios dumped from a similar board and the standby light stopped flashing, TV will turn on for few seconds and then turn off. So this is why I believe bios is corrupted. Any Help??
                      Last edited by shawnpsx323; 10-15-2022, 11:19 AM.

                      Comment


                        Re: Eeprom dump thread!

                        Originally posted by cheeky2 View Post
                        I have a Blaupunkt 39/210I-GB-5B-F3HBKU-EU that has a corrupted flash ic as it is stuck in standby.
                        Main board TP.MSD309.BP85
                        screen V390HK1-LS6-Rev.C8
                        Does anyone have a working dump for this model or similar?
                        The only one I could find was on the russsian site here (which I cannot register on!)

                        Thanks in advance
                        tp.msd309.bp85 flas dump
                        Attached Files

                        Comment


                          Re: Eeprom dump thread!

                          Originally posted by omruu9 View Post
                          your file
                          thank you so much

                          Comment


                            Re: Eeprom dump thread!

                            I've spent the last few days scouring the web for a new EEPROM for my Vizio E550i-B2 with no success. Does anyone have a dump for this model?

                            Comment


                              Re: Eeprom dump thread!

                              thanks

                              Comment


                                Re: Eeprom dump thread!

                                Originally posted by totof View Post
                                Thank you very much lotas.
                                In fact I can't fully test the binaries because I don't have the TV at home, I only have the electronic boards and the LED bars.
                                The second binary (ue55mu6105_ic1604_II.bin) doesn't work, I don't even have the standby led.
                                On the other hand, the first binary (ue55mu6105_ic1604.bin) seems to work: I have the standby LED, the tv turns on with the remote control and the backlighting turns on fine. On the other hand, to test the image, I will have to wait to return to my parents and it will only be in several weeks.
                                I will post back to the forum at that time.
                                Hello
                                Two months later I was able to return to my parents home and test the programming of the motherboard.
                                The TV restarted without any problem and the picture is perfect.

                                Thank you lotas

                                Comment


                                  Re: Eeprom dump thread!

                                  Originally posted by totof View Post
                                  Hello
                                  Two months later I was able to return to my parents home and test the programming of the motherboard.
                                  The TV restarted without any problem and the picture is perfect.

                                  Thank you lotas
                                  Hi, glad it worked out.

                                  Comment


                                    Re: Eeprom dump thread!

                                    here is the corrupted philips bin file
                                    65pus6162/05
                                    sorry i cant seem to upload .bin file
                                    can somebody advise please
                                    Attached Files

                                    Comment


                                      Re: Eeprom dump thread!

                                      hope this is correct
                                      Attached Files

                                      Comment


                                        Re: Eeprom dump thread!

                                        Originally posted by jimbofz View Post
                                        here is the corrupted philips bin file
                                        65pus6162/05
                                        sorry i cant seem to upload .bin file
                                        can somebody advise please
                                        And why is this size small, what chip did you read the dump from?
                                        Attached Files

                                        Comment


                                          Re: Eeprom dump thread!

                                          Originally posted by lotas View Post
                                          And why is this size small, what chip did you read the dump from?
                                          cct ref U409
                                          M24128 BRMN6TP
                                          this is from the cct diagram
                                          the number on the chip is difficult to read
                                          :128br 713t with green paint on pin 1

                                          Comment

                                          Working...
                                          X