Panasonic tx-55cx802b stuck on panel test mode.
It was working normally but few days ago some of the LED reflectors fall off.
I've opened it up carefully, re-glued, while it was open switched it on to test LEDs.
Then carefully assembled back.
After plugging in to power remote does not work.
Using power button on the TV it turns on but gets itself into a panel testing mode: white, gradient, red, gradient, blue, gradient, green and so on switching between colours.
Anyone knows how to get out of this panel testing mode?
I've tried so far:
Switching off via remote or using power button on the TV, switching back on via remote or power button on the TV. Removing power for seconds while pressing power on button on the TV.
No difference so far.
Help would be highly appreciated.
It was working normally but few days ago some of the LED reflectors fall off.
I've opened it up carefully, re-glued, while it was open switched it on to test LEDs.
Then carefully assembled back.
After plugging in to power remote does not work.
Using power button on the TV it turns on but gets itself into a panel testing mode: white, gradient, red, gradient, blue, gradient, green and so on switching between colours.
Anyone knows how to get out of this panel testing mode?
I've tried so far:
Switching off via remote or using power button on the TV, switching back on via remote or power button on the TV. Removing power for seconds while pressing power on button on the TV.
No difference so far.
Help would be highly appreciated.
Comment