![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
|
![]() Hi friends;
TV's image completely gone. My transactions; https://yadi.sk/d/3fJq7VnlbL7mqA?w=1 both of led bars have been replaced. I played flex on cof board (cof board>>tv display 6 quantity).The fault is not fixed. I disabled it in turn;T-con >cof board between flex fault is not fixed. Image is still distorted. I have read;power board(DPS-214-CP)ON CN3 socket all Voltage. I have read T-con board voltage. Could you help me;please. |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
|
![]() hi guys;
will nobody help me ? |
![]() |
![]() |
![]() |
#3 |
Badcaps Veteran
Join Date: Aug 2015
City & State: Cardiff
My Country: Wales
Line Voltage: 230V AC, 50Hz
I'm a: Hobbyist Tech
Posts: 6,544
|
![]() Can you post your pictures of the circuit boards on this Forum and also what voltage checks have you done and what were they?
__________________
Willing to help but I'm no expert. |
![]() |
![]() |
![]() |
#4 |
New Member
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
|
![]() |
![]() |
![]() |
![]() |
#5 |
New Member
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
|
![]() Last edited by ay_erdi; 09-01-2020 at 03:56 PM.. |
![]() |
![]() |
![]() |
#6 |
Badcaps Veteran
Join Date: Aug 2015
City & State: Cardiff
My Country: Wales
Line Voltage: 230V AC, 50Hz
I'm a: Hobbyist Tech
Posts: 6,544
|
![]() That does not look good. If you remove one of the ribbons from the Tcon to the panel what is the picture like. Then reconnect the ribbon and remove the other ribbon to the panel and check the picture again.
Have you check all the voltages are correct on CN3 and CN4 of the power supply? Last edited by dick_barton; 09-03-2020 at 09:30 AM.. |
![]() |
![]() |
![]() |
#7 |
New Member
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
|
![]() I removed ribbons one by one,#5 reply view ne changed.fault goes on.
I read on CN3 socket all voltages.CN4 socket no connected the cable ,this socket is empty |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|