Hi guys i have just been given a Sony BRAVIA KDL-40S2010 to repair the main issue is when changing freeview channels the tv turns off and then back on its identical issue in this thread
so far i have tested all power supply voltages etc and they are all fine
https://community.sony.co.uk/t5/othe...ff/td-p/259942
Im guessing its a firmware issue as only happens when using digital freeview and the person i got it from said it was fine on analogue tv but after the digital switch over the problem started so i have been looking for the firmware for this set as sony may of issued a fix but cant find any can anyone help
EDIT!! i have just seen this thread does this sound like the correct firmware? if so anyone have a idea on how too install it
https://quuq.org/forum/index.php?top...28877#msg28877
so far i have tested all power supply voltages etc and they are all fine
https://community.sony.co.uk/t5/othe...ff/td-p/259942
Im guessing its a firmware issue as only happens when using digital freeview and the person i got it from said it was fine on analogue tv but after the digital switch over the problem started so i have been looking for the firmware for this set as sony may of issued a fix but cant find any can anyone help
EDIT!! i have just seen this thread does this sound like the correct firmware? if so anyone have a idea on how too install it
https://quuq.org/forum/index.php?top...28877#msg28877
Comment