Announcement

Collapse
No announcement yet.

Hannspree HT231HPB - PSU Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hannspree HT231HPB - PSU Question

    Hi there!

    I have been given a non-working HT231HPB monitor to repair. The owner has misplaced the stock PSU, so I will power it from my bench supply.

    However, before I start troubleshooting it, is there anyone out there that could please tell me what the polarity of the stock PSU is?

    If you could tell me if it's center pin positive or negative...even better, if you could post a picture of the power brick label, that would be extremely helpful.

    Looking forward to hearing from you!

    Cheers!

    Andy.

    #2
    Re: Hannspree HT231HPB - PSU Question

    On further internet investigation, and squinting at low res images...it seems to suggest center pin positive, but if someone could clarify for sure, that's be amazing...

    A.

    Comment


      #3
      Re: Hannspree HT231HPB - PSU Question

      Originally posted by JFunc View Post
      On further internet investigation, and squinting at low res images...it seems to suggest center pin positive, but if someone could clarify for sure, that's be amazing...

      A.
      For unknown connector polarity I've traced from where the centre pin enters the PCB to where there is a polarised component, an electrolytic capacitor is a good one to find.

      Dougie

      Comment

      Working...
      X