Announcement

Collapse
No announcement yet.

macbook air- 820-00165-A no PP5V S4RS3 or s4 state

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    macbook air- 820-00165-A no PP5V S4RS3 or s4 state

    as described i dont get either. i forced 5 volts onto pad 3 of dc in board connector and then hookup the charger i get 0.182amps wont turn on and i still get no s4 state.

    when i got this board j7000 was ripped out and i had to restore ppdcin_g3h to get to this point.

    #2
    Re: macbook air- 820-00165-A no PP5V S4RS3 or s4 state

    Missing PM_SLP_S4_L then I guess. All other G3H/S5/SUS rails present? Green light on Magsafe? Any pulses on PM_SLP_S4_L or other S4/S3/S0 rails?
    Last edited by piernov; 08-05-2018, 04:48 AM.
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment


      #3
      Re: macbook air- 820-00165-A no PP5V S4RS3 or s4 state

      i do get a green light/g3h/s5/sus

      what i dont get is pm_slp_s4_L - no pulsing

      s4/s3/s0 rails get a little bit of juice about 0.050v

      one area of 3v3_s4 goes up to 0.460v

      Comment

      Working...
      X