Announcement

Collapse
No announcement yet.

Samsung SyncMaster 223BW

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung SyncMaster 223BW

    Hi all,

    Have a little problem with a 223BW samsung ...

    Have changed all 5 820uF capacitors,the 330uF,and the big one 100uF/400V (with 150uF/400V)

    The problem is the monitor turns off after 2,4,5,10 minutes (no rule when) ...

    The power led is on,but no picture,after pressing the power button off/on the monitor works (for 2,3,6,9 minutes) ...







    Example : the autoadjust pressed,and after 5-10 sec screen goes off
    the autoadjust pressed, and after 30 sec the screen goes off

    the power button remains on (blue)


    thx
    Last edited by nbdy; 01-30-2018, 09:00 AM.

    #2
    Re: Samsung SyncMaster 223BW

    Check with a lamp if the image is still present.
    Low the brightness at minimum in order to see if it stays on for more time.

    Comment


      #3
      Re: Samsung SyncMaster 223BW

      Ok,with brightness on 0 the monitor is 20++ minutes up ....

      What to change ??

      Comment


        #4
        Re: Samsung SyncMaster 223BW

        Probably the inverter transformer.

        Comment


          #5
          Re: Samsung SyncMaster 223BW

          Will try to change,thx

          Comment


            #6
            Re: Samsung SyncMaster 223BW

            Hello,
            As i can see you are using windows 7 and maybe this wont help you but i will say.

            I had similiar problem,first i changed inverter transformer because it was turning monitor off after 5 sec, after that monitor was working same as yours 2,4,5,10 minutes.

            I have found out that was problem with windows 10 and graphic drivers because i had one monitor and just switched on another.

            Comment

            Working...
            X