![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2017
City & State: Ceuta
My Country: Spain
I'm a: Knowledge Seeker
Posts: 96
|
![]() Hi, that card in 3 diferent computers is only detected as a generic display driver, have nothing to do with drivers, post fine but not detected as a gtx, any clue? thanks
|
![]() |
![]() |
![]() |
#2 |
Boardkiller
Join Date: Feb 2014
City & State: slovakia
My Country: slovakia
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 2,617
|
![]() try MATS for memory damage
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2017
City & State: Ceuta
My Country: Spain
I'm a: Knowledge Seeker
Posts: 96
|
![]() Hi, finally it was a memmory fault as ktmmotocross said, thanks a lot.
But the problem was a faulty capacitor near the memmory module that was giving errors, so no need to work on the module, just replace the capacitor Graphic card working again, thanks a lot |
![]() |
![]() |
![]() |
#4 |
Boardkiller
Join Date: Feb 2014
City & State: slovakia
My Country: slovakia
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 2,617
|
![]() hpw u find that capacitor is bad?
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Jan 2017
City & State: Ceuta
My Country: Spain
I'm a: Knowledge Seeker
Posts: 96
|
![]() Hi, it looked discoloured, not same color as the ones in other memmories, checked with capacitance meter and changed to the value the other mems had and voila. Thanks KTM
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Apr 2021
City & State: Parcela/Mazowieckie
My Country: Poland
I'm a: Hobbyist Tech
Posts: 159
|
![]() That's really a creative diagnosis method, really would never come on it
![]() |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Jan 2017
City & State: Ceuta
My Country: Spain
I'm a: Knowledge Seeker
Posts: 96
|
![]() Well, I had a look in the directions where KTMmotocross told me, memmory problem, used MATS, it detected some (14K) faults, had a look with the microscope arround the faulty mem, saw a discolored capacitor and why not meassuring it???, looks like faulty? change it!!!, no heat aplied to the mem chip, so it seems to be just that capacitor out of range, now everything is running fine, detected as it is and GPU-Z tells its fine. Changed pads and thermal paste, runned furmark for an hour and still fine. Card is working and doing what it has to do, play games.
Thanks to KTM user and all of the comunity |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|