![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Boardkiller
Join Date: Feb 2014
City & State: slovakia
My Country: slovakia
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 2,624
|
![]() Gigabyte Rx560 - error 43
hello have this Rx560 that shows error 43. as mostly it is related to memory i reballed all chips and two memory tests show no error. so whe can be problem when error 43? |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Dec 2018
City & State: PL
My Country: PL
I'm a: Knowledge Seeker
Posts: 3
|
![]() Try reprogramming the bios
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Dec 2021
City & State: Arras
My Country: France
I'm a: Knowledge Seeker
Posts: 48
|
![]() Hello to you
. I had the same problem with code 43 and maximum resolution 1024x1080 on my Rx 470. =( And unable to install all the drivers. I had to erase the original program and reprogram another BIOS version. Try reprogramming the BIOS with AMDFlash I think. Ideally, save the original bios program on the chips and erase with a programmer found on Aliexpress and then install the correct compatible bios. Start by installing a bios from oldest to newest and see if it crashes the system. If nothing does check the voltages on bios and PCI Express level I think. Hoping that the GPU is not faulty. Send a photo with CPU-Z. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2021
City & State: Parcela/Mazowieckie
My Country: Poland
I'm a: Hobbyist Tech
Posts: 161
|
![]() It could be that tserver does not detect a memory error, when the memory is only "somewhat" broken, so that it fails on higher frequencies only.
There is a way to let tserver test on higher frequencies -> You may try the hint from DrasticRepairs at the end of the thread: https://www.badcaps.net/forum/showthread.php?t=101715 Last edited by DynaxSC; 01-26-2022 at 05:14 PM.. |
![]() |
![]() |
![]() |
#5 |
Boardkiller
Join Date: Feb 2014
City & State: slovakia
My Country: slovakia
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 2,624
|
![]() reball did not help so i found some used rams, replace it and bam. everything works
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|