EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TigerVieH
    New Member
    • Jan 2022
    • 6
    • Deutschland

    #1

    EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

    Hey everyone,

    is there someone who can help me with the EVGA GTX 980?
    EVGA141 Rev. 1.0

    2 blown mosfets and the connectors needs to be done new.

    Thanks in advance for your time and help!

    Greez,
    TigerVieH
  • TigerVieH
    New Member
    • Jan 2022
    • 6
    • Deutschland

    #2
    Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

    Thanks to the admin to made my post an own thread.

    Because the 4 pin connection is lost of the two blown mosfets (4927N), I need to reconnect them. To do this I need to know where they needs to be going.
    A picture I have attached.

    A boardview file or something like this would be very helpful and hopefully one of you can help me with this.

    Thanks a lot in advance

    All the best,
    TigerVieH
    Attached Files

    Comment

    • Bozog
      Senior Member
      • Jan 2022
      • 125
      • UK

      #3
      Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

      Check dicky96's discord for schematics https://discord.gg/vam6YC8vwU
      That looks like fun to fix

      Comment

      • TigerVieH
        New Member
        • Jan 2022
        • 6
        • Deutschland

        #4
        Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

        Originally posted by Bozog
        Check dicky96's discord for schematics https://discord.gg/vam6YC8vwU
        That looks like fun to fix
        Thanks so much!

        But I'm sorry, there are no files similar to my EVGA GTX 980 :-(
        So I'm still searching!

        Comment

        • TigerVieH
          New Member
          • Jan 2022
          • 6
          • Deutschland

          #5
          Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

          Hopefully I can use the empty slots above the actual damaged ones.
          So I put everything from the damaged phase into the "new" ones above.

          But for this the boardview would be very helpful

          Comment

          Related Topics

          Collapse

          • ReparaPC
            EVGA RTX 2070 Super Black with u610 blown up
            by ReparaPC
            I have an RTX 2070 Super from evga with a blown up IC. With the IC on the card, pin 17 had a short to ground. This pin is connected to the 5V rail by R993, a 0hm resistor. I removed both U610 and R993, to discover that the 5V rail has 800 Ohms of resistance to ground. After checking some resources online, i found a picture which describes the usual measurements a Turing series GPU should have in order to "work properlly". Interestingly enough, this gpu doesn't have U31, the IC responsible for the creation of the 5V on the card, as well as no L47.

            Are these 800 ohms rigth...
            05-08-2024, 03:10 PM
          • mattiaa
            EVGA GTX 1060 3gb blown mosfet
            by mattiaa
            hi, i start saying i am a noob and maybe i am asking something really stupid

            i have a blown mosfet (q521) that burned around him every pins.

            I noticed , watching this boardview ( gtx 1060 evga 6gb)that these 4 pins followed a circuit on the left , may i ask you if i can fix everything using some pad strips and attach everything on the small copper line you can see on the photo ?
            Also, may i know what does this mosfet do?
            what is 12v_f/steer ?

            P.S. Sorry if i am asking something really stupid but really , i don t even know where...
            03-30-2023, 03:37 PM
          • DarksiderX
            MSI GTX 770 TwinFrozr 2GB with some blown up mosfets
            by DarksiderX
            hello and thank you for checking this post, my friend had this graphics card was working just fine till a thunderstorm hit, got some mosfets blown up as shown in the pictures below.
            still trying to get the right name of these components so i can order them and try to replace them on hopes that it can be fixed (hopefully the GPU is still intact)
            if anyone here has the schematics for this exact card please feel free to send me the file or if you ever had a similar issue i would love it if you can provide some feedback (i am not a professional repairman, just trying to my best to...
            05-22-2022, 10:03 AM
          • Knight2000uk
            EVGA 1660 XC out of warranty, blown chip
            by Knight2000uk
            Have an Evga 1660 XC that's got a bad chip blown (ebay seller says onky boots in safe mode), I've had some help pinpointing the chip as EMF20B02V Field effect transistor, its pretty fried:


            Here's how it looks desoldered:


            Looking for some advice on repair, the area where its blown makes it difficult to trace the copper conductive tracks, I'm unsure if it was one large rectangular pad or if the area is mirrored the same as its opposite side with 2 separate contacts, its hard to tell without anything to reference to.
            Any help and advice is appreciated,...
            03-31-2022, 04:32 PM
          • kotel studios
            Intel D865PERL - no Vcore after replacing MOSFETs and MOSFET drivers
            by kotel studios
            Hi,

            Finally got time to fix this board up.
            At first it didn't give any POST codes. Turns out it was an unsupported Celeron D cpu. After dropping in an Celery 2.6gHz the CPU came out of reset with clock signal, but still no post codes. For a while it did work when I applied pressure to the ADP3168 chip, but on next reboot the MOSFETs started to burn. Then I left it as is for months.

            Now I came back prepared. Replaced the bad MOSFETs and the ADPxx18k drivers. Now I don't get any MOSFETs blowing up issues anymore. But sadly, the Vcore is missing. The whole VRM isn't...
            04-22-2025, 05:08 AM
          • Loading...
          • No more items.
          Working...