Samsung UE40C6600 problem with power supply

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Xristakis795
    Senior Member
    • Mar 2021
    • 162
    • Greece

    #1

    Samsung UE40C6600 problem with power supply

    Hi to all
    i have the above model of tv
    It has power supply bn44-00355a
    the problem is it burns the two mosfet TK8A50 page 5 of service manual
    I change the two mosfets after measurements I made without being able to find any other problem and again burns the new 2 mosfet
    can any of you help me figure out where these two components can burn?
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12085
    • U.S.

    #2
    Re: Samsung UE40C6600 problem with power supply

    Can you post the service manual so we can see what you are seeing?

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9528
      • Canada

      #3
      Re: Samsung UE40C6600 problem with power supply

      You likely have damaged gate drive components, check the DT1 to be sure the drive windings are not open, then check the resistors and diodes DM804 & DM805, you may need to lift one end to check them accurately
      You should also check the diodes on the TM801S secondary as one might have shorted.

      Comment

      • Xristakis795
        Senior Member
        • Mar 2021
        • 162
        • Greece

        #4
        Re: Samsung UE40C6600 problem with power supply

        thanks sir i will check it and i will tell you about
        as about as service manual downloaded free from electrotanya
        Last edited by Xristakis795; 01-26-2022, 02:18 PM.

        Comment

        Related Topics

        Collapse

        • sam_sam_sam
          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
          by sam_sam_sam
          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
          03-31-2024, 02:12 PM
        • sam_sam_sam
          Modification to a ZD-987 desoldering/soldering station using a external switching power supply
          by sam_sam_sam
          I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

          I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
          07-01-2024, 06:34 AM
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • cheeky2
          Samsung BN44-00262A H37F1-9SS power supply help finding blown value components!
          by cheeky2
          This Samsung combined power supply and inverter was replaced a while ago from a Samsung 37inch LE37B530P7W TV. However I would like to repair this one.
          I have replaced the Mosfets Q1820 and Q1821 ( FDPF7N50U) which were both blown and the fuse FM802S. The schematic for this power supply that is attached doesn't relate to this power supply as the driving transistors and diodes are D1830, D1831, D1832, D1833, Q1811 & Q1810 are nowhere on the schematic!
          Does anyone know what the components for D1830, D1831, D1832, D1833, Q1811 & Q1810 should be? I ask as I did change the Mosfets...
          06-15-2025, 05:12 AM
        • JimBanville
          Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
          by JimBanville
          The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
          Opened it up and discovered the power supply is making a faint clicking or ticking sound.
          I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
          I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
          09-13-2023, 07:21 AM
        • Loading...
        • No more items.
        Working...