LCD LED EDID EEPRom Dumps

[SMDFlea]

Here`s a small collection of EDID EEPROM dumps.

AU B141EW04 V4.bin
AU B141XG05 V0.bin
AU B150XG01 V2.bin
AU B154EW01 V5.bin
AU B156XTN02 0.bin
AU B156XTN02.1.bin
AU B156XW04 V5.bin
CHI MEI 150X3-L07 Rev C4.bin
CHI MEI N1506-L01 Rev C2.bin
CHI MEI N150X6-L01 Rev C1.bin
CHI MEI N154I2-L05 Rev C1.bin
CHI MEI N156BGE-L11 Rev C2.bin
CHUNGHWA CLAA154WA 01Y.bin
HITACHI TX39D99VC1FAA.bin
INNOLUX N156B6-L0B Rev C3.bin
QUANTA QD15XL04 Rev 03.bin
QUANTA QD15XL06.bin
SAMSUNG LTN150XB-L03.bin
SAMSUNG LTN156AT01.bin
SAMSUNG LTN156AT17.bin

[crowntoy99]

Re: LCD LED EDID EEPROM Dumps

thanks

[on/off]

Re: LCD LED EDID EEPROM Dumps

Thanks a lot.

[bachir2004]

Re: LCD LED EDID EEPROM Dumps

Add this to the collection.

[bluestone]

Re: LCD LED EDID EEPROM Dumps

Very good, what programmers are good for lcd led programming?

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

Very good, what programmers are good for lcd led programming?

Any programmer that supports the 24C02 eeprom. You can make your own cables or buy them .


https://www.youtube.com/watch?v=draX7V5IQZU

https://www.banggood.com/LED-LCD-2-i...p-1312793.html

[Romy2018]

Re: LCD LED EDID EEPROM Dumps

how to know that the screen need to flash?

[Romy2018]

Re: LCD LED EDID EEPROM Dumps

Does anyone have a led edid eeprom dumps for this LG-LP133WH2 (TLXF2) And Samsung LTN156AT24-T01 AND INNOLUX N156BGE-L21

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

Does anyone have a led edid eeprom dumps for this LG-LP133WH2 (TLXF2) And Samsung LTN156AT24-T01 AND INNOLUX N156BGE-L21

I have samsung C01 not T01.Can`t find an LG TLXF2 .

CHI MEI N156BGE-L21 Rev C1.bin
CHI MEI N156BGE-L21 Rev C2.bin
CHI MEI N156BGE-L21.bin
LG LP133WH2 (TL)(F2).bin
SAMSUNG LTN156AT24 C01.bin

[Romy2018]

Re: LCD LED EDID EEPROM Dumps

Thank you SMDFLEA its working. last thing i need also this ccfl edid eeprom dumps N156b3-L02 Rev.C1 please

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

Thank you SMDFLEA its working. last thing i need also this ccfl edid eeprom dumps N156b3-L02 Rev.C1 please

No, i don`t have it.Other members might post their dumps .

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

2 more dumps, from a Satellite L500 and Asus X53U

AU B156XTN02.2
LG LP156WH4 (TL) (A1)

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

Some more dumps to share, over 350.These were collected from various forums,thanks go to the OP`s.Some of the files have been renamed and checked to weed out any duplicates.

[String2016]

Re: LCD LED EDID EEPROM Dumps

hi thanks for sharing im new to EDID programming and today the edid connector arrived I try to program a LCD which has marked N56BG-L21 C1 and using MINIPRO TL886CS, I plugged in the device and also cable to screen and programmer, but when i click autodetect it cannot detect na lcd chip. can you please help me how to detect the and know the brand on 24c02 chip please

[String2016]

Re: LCD LED EDID EEPROM Dumps

any help on this how to identify on the programmer the 24c02 chip please

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

any help on this how to identify on the programmer the 24c02 chip please

Select it manually, not autodetect. If you still can`t read it it will be because of pin 7 ,WP,its a write protect pin .Desolder it, it will read ok in an adapter.Put something under the PCB to keep heat away from the screen and put kapton tpae/foil around the chip.

[String2016]

Re: LCD LED EDID EEPROM Dumps

if i put atmel AT24C02 and program it it program but error shows

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

The chip may not be a AT24C02, what are the chip markings .If it is a 24C02 desolder it and try it in an adapter, if it still doesn`t write the chip will be faulty or OTP one time programmable. If its OTP you have to replace with a spare AT24C02 or other .

[String2016]

Re: LCD LED EDID EEPROM Dumps

The lcd iS CHI MEI n156bge-l21 rev c1 and the chip with 8pin on the lcd board has only written 4327 6249

[SMDFlea]

Re: LCD LED EDID EEPROM Dumps

Solder a wire from pin 7 (WP) to pin 4 (GND) on the 24C02 and try it again.If that doesn`t work desolder it, try again,if that doesn`t work get another 24c02 .