Please schematic for Acer SW5-173

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bakre
    Senior Member
    • Dec 2014
    • 105
    • Zwolle

    #1

    Please schematic for Acer SW5-173

    Hello

    I need schematic for Acer SW5-173 with main board number
    A1VFB LA-G861P
    or if any one know about transistor number on main board U2013 or U27
    They are both the same marking code XB5IG it is an Sot 23-5

    Thanks
  • nickBcap
    Senior Member
    • Jan 2012
    • 114
    • New Zealand

    #2
    Re: Please schematic for Acer SW5-173

    Hi, I am checking out this board now. The battery is not charging but sure the battery is good. Maybe you know how to test the battery? But one guy repaired battery not charging by replacing a chip on the power button board. I am trying to find out which chip he replaced. Might have something to do with DCIN, but I new to this.
    Thanks for any help.

    Comment

    Related Topics

    Collapse

    • Dani_2024
      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
      by Dani_2024
      Hi and thanks in advance for any input you might provide!
      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
      10-28-2024, 05:06 PM
    • jb_Bak
      Sony xbr-65x900c main board issues?
      by jb_Bak
      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
      Power Board Connector that goes to Main board
      CN6401
      Pin 01 NC
      Pin 02 NC
      Pin 03 "BL_ON": 0V
      Pin 04 "N/C"
      Pin 05 "STBY 3.3V": 3.5V
      Pin 06 "GND": N/C
      Pin 07 "AC_OFF"...
      09-27-2021, 04:52 PM
    • JDC
      (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
      by JDC
      ONN 100012588
      Issue: No Power, Then Rebooting After Main Board Change

      Short answer: replace main board and power board
      Technical answer: replace main board and Q306 & Q307 on power board.

      Long answer:

      TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
      07-15-2022, 07:39 AM
    • cheeky2
      Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
      by cheeky2
      I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
      Obviously the same LVDS connector for the screen connection...
      05-25-2024, 03:27 AM
    • johnbeton
      looking for schematic for Acer SP313-51N board Yacht_TL 203022-1
      by johnbeton
      Hello,

      I'm looking for the schematic for a Acer board Yacht_TL 203022-1
      The board had some minor liquid damage.
      I have no shorts, have 3v, 5v, 3.3v, ... but no leds or power on.
      When touching certain parts of the board with my finger, the powerleds go on or start blinking.
      11-11-2024, 04:59 AM
    • Loading...
    • No more items.
    Working...