I got this MacBook air mid 2013, I was told it would not power up. I found a bit of corrosion around the JTAG connector so removed the connector and checked for shorts.
No shorts found and no other signs of corrosion, I plugged in than the MacBook powered up however does not recognise the SSD
I checked the power going to the SSD and it is getting 3.3v so I thought maybe the SSD was fried, I then tried another that is not being recognized either.
I bought a converter to m.2 and used a known working m.2 drive and this is also not recognised, this m.2 has an activity light on and it comes on and stays solid then goes off, should blink when accessed.
I formated all drives HFS+, NTFS, fat32. MacOs and windows cannot see the drives.
Any ideas appreciated
No shorts found and no other signs of corrosion, I plugged in than the MacBook powered up however does not recognise the SSD
I checked the power going to the SSD and it is getting 3.3v so I thought maybe the SSD was fried, I then tried another that is not being recognized either.
I bought a converter to m.2 and used a known working m.2 drive and this is also not recognised, this m.2 has an activity light on and it comes on and stays solid then goes off, should blink when accessed.
I formated all drives HFS+, NTFS, fat32. MacOs and windows cannot see the drives.
Any ideas appreciated
Comment