Hi guys
My RT809H is not detecting any chip. Whenever i try to detect any chip it's keep showing me messages.
Chip pins is detected poor contact, operation has been terminated.
chipPin: 6-30-24
Chip ID identified error, the chip not well placed or has been damage.
No matter which chip i use or which adapter i use it's keep giving me random messages and random errors.
If you look at the picture 1 and 2 same thing happen here is well. random errors here is well.
when i bought new i used only once and even then it wasn't reading any chip.
I have tried 2017,2018,2019,2020,2021 version software ;(
it's showing 4.8v with usb cable, is it enough voltages to run this programmer or do i have to give external power is well.
My RT809H is not detecting any chip. Whenever i try to detect any chip it's keep showing me messages.
Chip pins is detected poor contact, operation has been terminated.
chipPin: 6-30-24
Chip ID identified error, the chip not well placed or has been damage.
No matter which chip i use or which adapter i use it's keep giving me random messages and random errors.
If you look at the picture 1 and 2 same thing happen here is well. random errors here is well.
when i bought new i used only once and even then it wasn't reading any chip.
I have tried 2017,2018,2019,2020,2021 version software ;(
it's showing 4.8v with usb cable, is it enough voltages to run this programmer or do i have to give external power is well.
Comment