Announcement

Collapse
No announcement yet.

UE55KU7000 led active for a short time...!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    UE55KU7000 led active for a short time...!

    Hi all,
    I have a mainboard BN94-10832C from UE55KU7000 that have active stand-by led just for 2-3 seconds; no respond at any commands from remote.
    After this time led disappear.
    Backlight is ok, tested without cable from power supply.
    Any ideea...?

    #2
    Re: UE55KU7000 led active for a short time...!

    Sounds like the mainboard for sure. Could be the eeprom needs reprogramming. Had a few of the k and m series have this problem with similar symptoms.

    Comment


      #3
      Re: UE55KU7000 led active for a short time...!

      Yes, as for sure need eeprom/flash to write with a good information...
      But i don't have any dump tested for this model.

      Comment


        #4
        Re: UE55KU7000 led active for a short time...!

        See if you can read your eeproms and post the dumps here. There a a few people on this forum that are able to repair them for you.

        Or check eBay. Sometimes you can find eeproms already programmed. It’s better than buying a new board.

        Comment


          #5
          Re: UE55KU7000 led active for a short time...!

          Hi.

          https://disk.yandex.com.tr/d/S7zq8Ir6DAkb8A
          https://www.badcaps.net

          Comment


            #6
            Re: UE55KU7000 led active for a short time...!

            Thank you very much arizanotlari !
            Is possible to have also dump of 24c512 for this model...?

            Comment

            Working...
            X