Announcement

Collapse
No announcement yet.

Abit SE6 recapping using 10mm caps

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Abit SE6 recapping using 10mm caps

    Yet another capacitor-related commonly failed Abit board, the SE6... This board has a quantity of 18 - 1500uF 6.3v caps that fail. I've seen some with JPCON and others with Teyah.





    Ok, when at all possible, I don't recap a board using 8mm caps. In some cases, the use of 10mm replacement caps is just not possible, but this board is not one of those. Yes, the 10mm caps fit a little tightly, but in the end, it will look and work perfectly.







    I've had a few emailing me about 10mm caps in place of 8mm, mostly associated with the BP6, which I always use 10mm caps in. This board is no different.
    <--- Badcaps.net Founder

    Badcaps.net Services:

    Motherboard Repair Services

    ----------------------------------------------
    Badcaps.net Forum Members Folding Team
    http://folding.stanford.edu/
    Team : 49813
    Join in!!
    Team Stats
Working...
X