Radeon Vega 64 Model D050 SMB Capacitor identification

[Slashernator]

Hi,
I've attached a picture of the Vega board model D050 that is missing a SMB Capacitor (At least that's what I think it is!).

The component is C611 that is similar to C609 and C594 shown in the pic. Can anyone tell me what I need to order to replace it?

Any other info please shout .
cheers

[Slashernator]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

Forgot to mention that it measures 3mm x 1mm if that helps!

[Slashernator]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

Yo guys,
how do I measure the capacitance of single SMB capacitor removed from the PCB? Any links much appreciated. Most aren't in english.

[dicky96]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

With a capacitance meter

[Slashernator]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification


Already subscribed last week. I'll get right on it.

[R_J]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

You may also be able to look up the datasheet for the ic and see what is used in that circuit.

[Slashernator]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

Hi,
Thanks for the assistance.

Where do i find the datasheet? Really new to this .

I checked the capacitor and it should've measured 1102 microfarads when set at 2000 microfarad on the meter.

What does this actually mean when I'm looking to replace the capacitor.
btw, measured the bad one and it was 70!!

then where do I find a replacement.
Any help?

[Slashernator]

Re: Radeon Vega 64 Model D050 SMB Capacitor identification

Got one.
What does a measurement of 1096 at 2000microfarads mean?

[Slashernator]

Gigabyte Vega64 GPU ,What Surface Mount Component is this

I have this component that was loose. What SMB component is it?
Metric 3216 or imperial 1206.
From a Vega64 Gigabyte GPU.
The other two circled good components measured 1102 when the capacitance meter was set at 2000 microF. not sure what that means either.

Any assistance to identify and aid my understanding, much appreciated.

btw, couldn't remove any more solder than shown, set my ksger12 at 500!