Hello all,
I would like to learn the 'how to' rather then just some one telling me the issue here.
I have acquired 6 Zotac B150 mining boards all with a no boot symptom in attempts to learn more the general sequence to why a main board fail when all replaceable compatible components are replaced with know working components. So processor, ram and cmos battery have all been rulled out as the issue.
I have searched for a generic mainboard troubleshooting how to, but can't seem to find one.
The PSU will not engage when the power switch is pressed. I can jump the PSU engage wires on the 24 pin connector and the PSU turns on and still no post. However it does stay on so it would seem that there is no shorted mosfet. To which I was hoping the issue was.
What direction should I be looking next?
I would like to learn the 'how to' rather then just some one telling me the issue here.
I have acquired 6 Zotac B150 mining boards all with a no boot symptom in attempts to learn more the general sequence to why a main board fail when all replaceable compatible components are replaced with know working components. So processor, ram and cmos battery have all been rulled out as the issue.
I have searched for a generic mainboard troubleshooting how to, but can't seem to find one.
The PSU will not engage when the power switch is pressed. I can jump the PSU engage wires on the 24 pin connector and the PSU turns on and still no post. However it does stay on so it would seem that there is no shorted mosfet. To which I was hoping the issue was.
What direction should I be looking next?