Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Tablets, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 11-02-2020, 04:01 AM   #1
New Member
Join Date: Sep 2020
City & State: CAGLIARI
My Country: Italia
I'm a: Knowledge Seeker
Posts: 7
Default Lenovo 80e5 g50-80 ACLU3/ACLU4 NM-A361 rev.1.0 non si accende

Lenovo 80e5 g50-80 ACLU3/ACLU4 NM-A361 rev.1.0
hello I would like some help, my laptop Lenovo 80e5 g50-80 ACLU3 / ACLU4 NM-A361 rev.1.0 does not turn on. when I insert power the led4 flashes and the fan moves a little. I only found the diagram pdf 2014-09 -10 REV0.4. I would need for BoardViewer the version for my ACLU3 / ACLU4 NM-A361 rev.1 and also schematic pdf. Also doing measurements with the multimeter I find on the line + 1.35_VGS to ground 6.06 ohm. According to me too low.
am I facing a short circuit?
that line affects the rams soldered on the board
paolotto is offline   Reply With Quote
Old 11-02-2020, 06:58 AM   #2
Badcaps Veteran
Join Date: Jun 2015
City & State: siliguri
My Country: india
Line Voltage: 220vac,60hz
I'm a: Professional Tech
Posts: 4,441
Default Re: Lenovo 80e5 g50-80 ACLU3/ACLU4 NM-A361 rev.1.0 non si accende

Use NM-A271 schematic. Its quite similar.Start by measuring resistance on all coils. Voltage on pin1-4-8 of PQ301/PQ302?? With onboard soldered memory, the resistance may be correct.
mcplslg123 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 03:57 PM.
Did you find this forum helpful?