Yamaha RX-A1080 No power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DjKrish
    Badcaps Veteran
    • Oct 2012
    • 354
    • SG
    #1

    Yamaha RX-A1080 No power

    Been having this unit for sometime now but not a single chance of obtaining the schematic diagram online. The unit came with a shot mosfet, some resistors and a MIP004 IC. Managed to replace the mosfet, mip004 but stuck at 2 resistors thats burned. Can anyone please help me identify these resistors? I only have 2 resistors thats not replaced now, the rest all replaced. This resistor is connecting to leg 7 of MIP004.

    Could it be 801? 800 Ohms? Impossible to be 108 as thats 1 G Ohm :P
    Attached Files
    Last edited by DjKrish; 05-18-2022, 11:40 PM.
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4479
      • Russia
      #2
      Re: Yamaha RX-A1080 No power

      Check.
      Attached Files

        Comment

        • DjKrish
          Badcaps Veteran
          • Oct 2012
          • 354
          • SG
          #3
          Re: Yamaha RX-A1080 No power

          Originally posted by lotas
          Check.
          Thank you so much, youre the man. Can i have R3558, R3511 and R3514 as well?

            Comment

            • DjKrish
              Badcaps Veteran
              • Oct 2012
              • 354
              • SG
              #4
              Re: Yamaha RX-A1080 No power

              If you dont mind, can i have the full parts list please? Just in case for future repairs. Truly appreciate your help.

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4479
                  • Russia
                  #5
                  Re: Yamaha RX-A1080 No power

                  R3558
                  Attached Files

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      ORIGINAL POWER SUPPLY BOARD
                      7 Photos
                      11-22-2024, 01:46 PM
                    • PantherDave
                      Microsoft Surface Pro (5th gen) model 1796 - no power
                      by PantherDave
                      Hi all!

                      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                      https://www.badcaps.net/forum/troubl...-hardware-devi...
                      05-29-2024, 02:01 PM
                    • GLISIT
                      Asus Probook P5440UF-XB74 power issue
                      by GLISIT
                      Hi all,

                      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                      01-16-2025, 02:29 PM
                    • Gjackson
                      Air-conditioning unit power supply failing to power up
                      by Gjackson
                      Hi all, I managed to narrow down which PCB was causing my Haier AC to throw out an E7 error code (E7 indicates that the indoor unit and outdoor unit cannot communicate). I found that the outdoor unit power board which gives 5v and 15v to the outdoor unit module board fails to fully power up.. The power Led starts to fade in incredibly slowly and the 5v and 15v power buses jump around like crazy and never reach their required voltage. I unplugged the module board from the power board and the power board powered up fine! It had a steady 5v and 15v out and the power LED came on instantly and Bright....
                      01-08-2022, 09:24 AM
                    • sam_sam_sam
                      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                      by sam_sam_sam
                      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                      03-31-2024, 02:12 PM
                    • Loading...
                    • No more items.
                    Working...