Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Audio Equipment
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 06-07-2022, 08:14 PM   #21
DjKrish
Badcaps Veteran
 
Join Date: Oct 2012
City & State: SG
My Country: SG
Line Voltage: 240v
I'm a: Knowledge Seeker
Posts: 309
Default Re: Pioneer DDJ-SZ XLR right is distorting

Quote:
Originally Posted by CapLeaker View Post
I think you are going to need that oscilloscope as I suggested earlier. For this project, you don't need a real fancy one either. Something basic will do just fine. Other than that, you just stab around in the dark and get frustrated on top of it.

You know that the unbalanced output jacks work, but not one of the balanced output. The unbalanced ports work of Master Hot. So there must be something either with the Master Cold going on on the bad balanced port or there is something not equal coming out of the DAC. You need to be able to compare that in order to go any further.
Hi just curious, im planning to get a oscilloscope. How many MHz would you recommend for audio equipment repairing purposes? is 50 enough? 100? 200? Cause mainly i will be using the scope only for audio equipment's only.
DjKrish is offline   Reply With Quote
Old 06-08-2022, 03:57 PM   #22
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 5,219
Default Re: Pioneer DDJ-SZ XLR right is distorting

I use a 100Mhz scope for everything, but I am not only doing audio.. For audio even a 50Mhz scope is enough. A 200Mhz scope is nice, but to 95% not needed. It really depends on what you want to do and how future projects proof you wanna be.
CapLeaker is offline   Reply With Quote
Old 06-08-2022, 09:03 PM   #23
DjKrish
Badcaps Veteran
 
Join Date: Oct 2012
City & State: SG
My Country: SG
Line Voltage: 240v
I'm a: Knowledge Seeker
Posts: 309
Default Re: Pioneer DDJ-SZ XLR right is distorting

Quote:
Originally Posted by CapLeaker View Post
I use a 100Mhz scope for everything, but I am not only doing audio.. For audio even a 50Mhz scope is enough. A 200Mhz scope is nice, but to 95% not needed. It really depends on what you want to do and how future projects proof you wanna be.
Yeah thats what my friend said as well. Since i only use scope for audio purposes, he asked me to get the 50MHz scope, he said thats more than enough for audio repairing. So i might a portable chinese ones. As i dont use scope all the time, so i dont want to really waste a lot of money on something i rarely use. Been reviewing the portable ones, seems good so far. Does the basic job
DjKrish is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:51 AM.
Did you find this forum helpful?