Announcement

Collapse
No announcement yet.

VAL40 LA-8226P Rev.1.0 BIOS Needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    VAL40 LA-8226P Rev.1.0 BIOS Needed

    Hello guys, i need bios for LA-8226P mainboard. In my country, it's asus K45VD.
    The problem it won't power on and no indicator lights turned on, 3valw, 5valw, 3v_ec is present and 3.3 volt also present on power button but, no voltage present on main bios chip, it's a flat 0 volt reading on my multimeter on all pins of the chip but no shorts.

    i've attached all the files needed:
    - asus k45vd (LA-8224P).rar : the file i've downloaded from the internet just using model name (K45VD) as keyword
    - the schematic for LA-8226P
    - Asus-K45VD-Edit.rar : trying edit bios file downloaded from asus website
    - Asus-K45VD-K45VMAS234.zip : bios file downloaded from asus website
    - Asus-K45VD-LA-8226P.rar : dumped bios file before flashed using files i've downloaded
    Attached Files
    Last edited by kodox; 02-11-2019, 12:19 AM.

    #2
    Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

    anyone...???
    please....

    Comment


      #3
      Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

      I think how you editing/fixing your bios is correct.
      Maybe ENE KB9012 need reflash as well.

      Comment


        #4
        Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

        which file should i use to flash it to ENE?
        can it be done using CH3414A programmer?

        Comment


          #5
          Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

          Actually didn't have any experience with CH3414A for ENE chips, but.....

          Check this link: http://*******/viewtopic.php?t=46218

          Comment


            #6
            Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

            Originally posted by kodox View Post
            which file should i use to flash it to ENE?
            can it be done using CH3414A programmer?
            It will be wiser to use a kbc programmer instead of CH34 mobo might be damaged if pinout is wrong.

            Comment


              #7
              Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

              It's work with CH3414A Black Edition.

              Have been tested with toshiba Satellite L40D-A.

              Just be carefully, Also no need give 3V or pin 8 of CH3414A not connected.
              Took 10 minutes for backup (read and verify) and for write as well.

              Thanks for densky59, Postal3 Author and vlab.

              Good Luck!

              Attached tools:
              https://www.dropbox.com/s/kgkeoyn7ro...85534.jpg?dl=0
              Attached Files
              Last edited by on/off; 02-14-2019, 07:53 PM.

              Comment


                #8
                Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

                @on/off: thank's, i'll try it later. working on DELL buildup PSU first at the moment

                Comment


                  #9
                  Re: VAL40 LA-8226P Rev.1.0 BIOS Needed

                  Originally posted by kodox View Post
                  Hello guys, i need bios for LA-8226P mainboard. In my country, it's asus K45VD.
                  The problem it won't power on and no indicator lights turned on, 3valw, 5valw, 3v_ec is present and 3.3 volt also present on power button but, no voltage present on main bios chip, it's a flat 0 volt reading on my multimeter on all pins of the chip but no shorts.
                  Not sure if you still need it. On this motherboard, BIOS is not supplied by 3VALW and therefore there will be 0V on BIOS when its Off.

                  If you have no shorts and all the mains rains are present, try checking if its detecting the charger. Measure voltage on ACIN_D (pin 110 on KB9012)

                  Comment

                  Working...
                  X