Yes it shut off the you need to press the power to see its display again
I also think its the LID switch because if I jsut remove the power flex it will not sleep
It would be important to know if the laptop does indeed shut off completely or go into hibernation/sleep.
The power led does usually "breathe" or blink when the laptop is hibernating or sleeping.
Plug the power flex back in and wiggle it a little while the laptop is on. You might also try flexing the boards a little. Maybe there's a broken solder joint somewhere. But don't bend the boards like crazy! That would cause more damage.
It would be important to know if the laptop does indeed shut off completely or go into hibernation/sleep.
The power led does usually "breathe" or blink when the laptop is hibernating or sleeping.
Plug the power flex back in and wiggle it a little while the laptop is on. You might also try flexing the boards a little. Maybe there's a broken solder joint somewhere. But don't bend the boards like crazy! That would cause more damage.
Thanks I think the problem was the TRANSISTOR around the powerbutton board i think its faulty
Comment