Hi all,
I have an emachines d525 with no power. The power connector is ok, I tested and it gives 18Vcc. The batery is nor charging. All LEDS are off while the power cord is connected.
I have attached the schematic.
Thank you for your help.
Best regards,
Juan A.
I have an emachines d525 with no power. The power connector is ok, I tested and it gives 18Vcc. The batery is nor charging. All LEDS are off while the power cord is connected.
I have attached the schematic.
Thank you for your help.
Best regards,
Juan A.
Comment