I have a UN60D8000YF with a BN44-0432A power supply and a BN41-01622C main board.
The set was working then not,then started clicking.
Wilth the power supply disconnected from the main board I can occasionally get it to power the LED back lights , getting it to stop clicking is luck.
Checked caps and diodes and mosfets the best I could. When it stop clicking there is 5v and 18v on the connector to the main board.
A schematic or suggestion would be great.
Thanks
The set was working then not,then started clicking.
Wilth the power supply disconnected from the main board I can occasionally get it to power the LED back lights , getting it to stop clicking is luck.
Checked caps and diodes and mosfets the best I could. When it stop clicking there is 5v and 18v on the connector to the main board.
A schematic or suggestion would be great.
Thanks
Comment